Loading the Disc Memos of the second CD player
If the second CD player has the Disc Memo function (see page 24), you can load the Disc Memos of the second CD player into this player�s memory and display them on this player.
Fading In or Out
You can manually fade the sound in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector.
FADER
1 2
Press MENU/NO. Turn the JOG dial until �LOAD 2ndMEMO?� flashes in the display.
ALL DISCS
CD1
I/u
+100
LOAD 2ndMEMO?
3
Push the JOG dial. This player starts loading. (Loading takes about one minute.) To
Start play fading in
Press FADER
During pause. �FADE� appears in the display and the Q indication flashes. The play fades in. When you want to start fading out. �FADE� appears in the display and the q indication flashes. The play fades out and the player pauses.
Note
If each Disc Memo of the second CD player has more than 13 characters, only the first 13 characters of that Disc Memo is loaded into this player.
End play fading out
Note
Labeling discs of the second CD player
You can label discs of the second CD player or change the Disc Memos loaded from the second CD player.
Fading lasts for about 5 seconds.
1 2
Press MEGA CONTROL. The MEGA CONTROL button lights up. Turn the JOG dial to select the disc you want to assign a Disc Memo to. If the disc slot you select does not have any disc, �NO DISC� appears in the display and you cannot assign a Disc Memo. Press MENU/NO. �MEMO IN ?� appears. Push the JOG dial. Input the new Disc Memo following the procedure in �Labeling Discs� on page 24.
3 4 5
Note
The new Disc Memos are stored on this player�s memory, so you cannot display them on the second CD player.