PIONEER CDJ-700S
Manual de Usuario

ADVANCED OPERATIONS

ADVANCED TECHNIQUES
Technique 3: Real Time Cue and Cue Point Sampler
LOOP OUT /EXIT
LOOP IN/ REAL TIME CUE/OUT ADJUST

D
'
� TIME MODE AUTO CUE

PROFESSIONAL

COMPACT DISC PLAYER

CDJ-700S
TEMPO ±10/±16 MASTER TEMPO

Set a cue point on the fly, and sample the currently playMASTER TEMPO
OPEN

TRACK SEARCH 4 ¢ IN/REALTIME CUE OUT/EXIT LOOP SEARCH OUT ADJUST RELOOP

RELOOP

1

¡

CUE

CUE
PLAY/PAUSE � REV + FWD

TEMPO
6

TEMPO

PLAY/ PAUSE

ing track. 1. During playback, press the LOOP IN/REAL TIME CUE button. 2. Press the CUE button with timing that will give the playback an accent. ÷ Playback will return to the cue point set in step 1. 3. In rhythm to the piece, press the PLAY/PAUSE button (6). ÷ The track will play from the cue point. ÷ If you press the CUE button instead of the PLAY/ PAUSE button, sound will be produced only as long as the button is pressed. ÷ By repeating steps 2 and 3 in a way that matches the track being played, you can create playback that sounds like a sampler is being used.

Technique 1: Master Tempo and Seamless Loop
To cover the currently playing track, create a loop on the standby track matching the same tempo and without changing the pitch. 1. Set MASTER TEMPO button to ON. ÷ The MASTER T. indicator lights on the display. 2. Move the TEMPO slider to adjust the tempo of the standby track to that of the current track. 3. At the point you wish to begin the loop, press the LOOP IN/REAL TIME CUE button. 4. At the point you wish to end the loop, press the LOOP OUT/EXIT button.

Technique 4: Loop and Reloop ----Short Cut---Make a track composed of the introduction and ending only. 1. While standing by to play the next track, creat a loop containing only the ending portion of the track. 1 Press the LOOP IN/REAL TIME CUE button at the point you wish to start the loop. 2 Press the LOOP OUT/EXIT button at the point you wish to end the loop. 2. Press the track search button (4) to begin play from the beginning of the track. 3. Pay attention to the timing as the introduction finishes playing, and press the RELOOP button at the point just before the vocal portion begins. ÷ The play will shift to the set loop and play the track�s ending portion.

Technique 2: Real Time Loop and Reloop
Create a loop during playback, cancel the loop, and then return to the canceled loop. 1. During playback, press the LOOP IN/REAL TIME CUE button at the point you wish to begin the loop. 2. At the point you wish to end the loop, press the LOOP OUT/EXIT button. 3. When you no longer desire loop play, press the LOOP OUT/EXIT button or RELOOP button. ÷ The loop play will be canceled at the next phrase. 4. When you wish to return to the earlier loop, press the RELOOP button. ÷ Loop play will return to the same playback loop canceled in step 3.

NOTE: Set the Auto Cue mode to OFF when using this shortcut.

13
<DRB1215> En