SHARP CDDP900E
Manual de Usuario

CD-DP900E

2

Adjust the speaker volume level whilst the test tone is being output from the centre or surround speakers. To set the centre speaker volume to the level of the front speakers:
When in the normal mode, press the CENTER LEVEL button to increase the volume and the CENTER LEVEL button to decrease it.

-10

-9 ... 0 ... +9

+10

To set the surround speaker volume to the level of the front speakers:
When in the normal or phantom mode, press the SURROUND LEVEL button to increase the volume and the SURROUND LEVEL button to decrease it.

-10
To adjust the speaker volume:

-9 ... 0 ... +9

+10




You can change the volume level within the range of +10dB to -10dB, in 1 dB steps.

The test tone will be heard from each speaker, in order, at about 2-second intervals.

The test tone will stop.

In normal mode:
Left (L ch) Centre (C ch) Right (R ch) Surround (S ch)

To balance the front speakers:
Press the BALANCE button to decrease the right speaker level (the left speaker level will increase), and press the BALANCE button to decrease the left speaker level (the right speaker level will increase).

Advanced Features

1

When in the normal or phantom mode, press the TEST TONE button.

3

After adjusting the speaker volume level, press the TEST TONE button.

In phantom mode:
Left (L ch) Right (R ch) Surround (S ch)

1
Notes:

15

1

15





Be sure to adjust the sound at your favorite listening position. The volume settings for the centre and surround speakers are stored in memory for future use. However, after a power failure or leaving the unit unplugged for over one day, they will return to initial settings.

25
02/1/8 CD-DP900E(UK)_2.fm

Enjoy the surround sound -