" Recording from the radio 1 2 3
Tune in to the desired station. (See page 19.) Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1 2
Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape is the same length as the master tape.
Press the REC/PAUSE ( button.
Recording will be paused.
)
4
Press the / button on the main unit or the TAPE 2 button on the remote control to start recording.
3 4
) button.
Press the TAPE (1 2) button until "TAPE 1" appears on the display. Press the REC/PAUSE ( ton.
Recording will be paused.
) but-
To interrupt recording:
Press the REC/PAUSE ( ) button. To resume recording, press the / (TAPE 2
Press the
(TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial. Erase-prevention tab of cassette tapes: ! When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. ! To protect the recorded sound, remove the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab.
Side A
Press the (TAPE ) button. TAPE 1 and TAPE 2 will simultaneously stop.
" Erasing recorded tapes
1
Tab of side B
Tab of side A
2 3 4
Load the tape to be erased into the TAPE 2 cassette compartment with the side to be erased facing toward you. Press the TAPE (1 2) button until "TAPE 2" appears on the display. Press the REC/PAUSE ( ) button. Press the / button on the main unit or the TAPE 2 button on the remote control to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
Web-site: www.sharp.co.uk/support
Help Line: 08705 274277 (office hours)
23
Recording to a cassette tape -
To stop dubbing:
Tape Recording
To stop recording:
5
Press the / button on the main unit or the TAPE 2 button on the remote control to start dubbing.
