(Continued)
Installation of the surround speakers:
Example: When installed on the wall Wall 60 - 90 cm (23" - 35") If possible, mount the surround speakers on the wall. lnstall them 60 - 90 cm (23" - 35") above the height of your ears when you are seated, if possible.
Example: When installed vertically
s To mount the surround speakers on the wall
3.2 mm (1/8") 5 mm (3/16") The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the left.
Min. 22 mm (7/8")
9 mm (3/8")
1
Drive one screw into the wall for each speaker as shown in the illustration.
1
5 mm (3/16")
q Make sure that both the screw and the wall can support a load of 20 kg (45 lbs.). q Drive the screws, so there is about a 5 mm (3/16") space between the wall and the head of the screw.
Wall mounting screw Wall surface Min. 17 mm (11/16")
2
Mount the surround speaker on the wall so that the screw head is inserted into the slot on the surround speaker.
2
Wall surface
Note: When the surround speakers are installed vertically, the speaker badge will be upside down. In this case, you can adjust the badge to face the proper direction. Just turn it by hand.
Badge
s Removing the speaker grilles
(Front speakers only)
1 2
Remove the lower part of the speaker grille first. Remove the upper part of the speaker grille.
q Only the grills on the upper woofers are removable. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms.
s Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes and push them lightly with the palm of your hand to secure.
