� Charge the batteries for at least 24 hours � Move closer to the base station � Use the line cable provided � Connect the line adaptor (when needed) to the line cord The is blinking. � Move closer to the base station � Check battery level � Register the handset to the base station The appears. � Replace the batteries with new ones (use only rechargeable batteries) Set-up Caller ID does not work properly. � Check with your local phone company that the CID service is subscribed to � Let the phone ring at least once before answering
The Call Waiting call cannot be answered. � Check with your local phone company and select the correct recall duration The handset displays nothing, but only the is blinking. � Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see Section 3.5) � Remove and place back the handset batteries Sound Handset does not ring! � Increase the volume � Make sure that the adaptor and the phone cord are connected properly � Move the handset closer to the base unit � Make sure the handset ringer is turned on ( is not displayed on the LCD)