2. SERVICE MODE
Service Mode 1. While Mains cord is disconnected, press STOP Button on the unit and plug in the Mains cord. 2. Version number of the front micom software is displayed. 3. Press FF/NEXT Button(>>/>>|) then Display segment test begins. 4. First all the segments will light and then a segment turns off one by one. 5. Disconnect Power cord to quit service mode. Emargency Eject
1. Remove 5 screws on the top cover and remove the top cover. 2. Remove 4 screws pointed with the arrows.
3. Remove the CD drive mechacomponent. (Lift up backside of the component and pull it backward so that the component is apart from the unit.)
4. Turn the gear to the direction shown with your finger and disc tray will be opened.
