One-Touch Recording 33
The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: q Channels are set up. q There is a tape in the TV/VCR. The record tab must be intact.
4 2 3
Press the STOP/EJECT button on the TV/VCR to stop the OTR.
POWER EJECT
SLEEP
SPEED
MEMORY
1
The COMBI button, then press the CH(annel). Up/Down buttons or the Number buttons to select the channel you want to record.
REC/OTR
PAUSE/STILL
REW
MENU
PLAY
STOP
STATUS/EXIT
F.FWD
CLEAR
2
4 1
Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears on-screen. Details are on page 32.
1 4 7
A.CH
CABLE/DBS
2 5 8 0
COMBI
3 6 9
+100
CH.
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will
OTR CH12 LENGTH 0:30
VOL.
VAR.SLOW
VCR PLUS+ /ENTER
MUTE
TRACKING SMART PICTURE
F.ADV SKIP INDEX SEARCH SEARCH
SLOW
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
Helpful Hints
� To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on-screen. � You can not pause an OTR. � To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. � You cannot record if RECORD DEFEAT is set to ON. Details are on page 43. � You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. � If the end of the tape is reached during an OTR, recording will stop. The TV/VCR will eject the tape and shut itself off. The REC(ord) light may flash.
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control.
