Preparation
Upgrading the Navigation Software
Once the version is updated, it cannot be restored to the former version.
6 Select [Yes/Oui/SÃ].
1 Start the engine. (Or turn the key to ACC.) 2 Select [I agree] on the WARNING screen. 3 Press
�
.
�
The program starts to load.
The Open/Tilt/Eject screen is displayed.
4 Select [Disc].
� �
The monitor opens. If there is a disc inside, it is ejected automatically.
5 Insert the program disc.
�
10
10
�
Printed side The monitor closes automatically.
Do not turn off the engine while the program is loading. (Do not switch ACC OFF.) If program loading is interrupted, it will start again from the beginning the next time the engine is turned on (or the next time ACC is turned ON).