AIWA CADW935
Manual de Usuario

MANUAL TUNING

When an FM stereo broadcast
Press the TUNER MODE MONO appears MODE/OSC button on the remote although

contains

noise
unit or the

button

on the main

control. reception is monaural.

on the display.

Noise is reduced, MODE

BAND +,To restore TUNERMODE/ stereo reception, repeat the above again.

To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. allocation system If you use this unit in an area where the frequency is 9 kHzLstep, change the tuning interval. Press the POWER button while pressing button. To reset the interval, repeat this procedure.

1 Press the TUNEFUBAND button on the main unit or the BAND button on the remote control repeatedly to select the desired band. m
When the TUNER/BAND button is pressed while the power is tuned station is off, the power is turned on and the previously received (Direct Play Function).

the TUNER/BAND

m
button to select a station.
the frequency changes. STEREO is displayed.

When the AM tuning

interval

is changed, are cleared.

all preset stations The preset

(see

�PRESETTING STATIONS) have to be set again.

stations

2 Press the 44
During FM stereo

or W
reception,

Each time the button is pressed,

To search for a station quickly (Auto Search)
Keep the ++ or button pressed until the tuner starts searching for a station. After tuning in to a station, the search stops. To stop the Auto Search manually, press the 4+ or button. The Auto Search may not stop at stations with very weak signals.

q

For better reception FM
Extend the rod antenna is inside and orient the unit. it for the best reception. Position the unit for the best AM The antenna reception.

kl!lu~ .. --_=-.

l!!-

6

ENGLISH