Part 1 - INSTALLATION INSTRUCTIONS
1 - Drilling the shelves: a) Using the cardboard template provided, and taking hole �B� as a point of reference, drill the shelves along the central axis to allow the passage of the chimney. The chimney must be inserted into the shelves before it is fixed to the hood canopy C (fig. 12). b) When installing the ducting version with the air outlet directed upwards, if the ducting fan unit is
S07_14
S36_12
12
S36_13
positioned below the line of shelves it will be necessary to drill a suitable hole in the top shelf only, to allow the air ducting pipe to pass through (fig. 13). 2 - Direction and position of the ducting fan unit a) The hood is normally supplied with the air outlet directed towards the wall (fig. 3), if it is to be installed with the air outlet directed to the right or left (fig. 4a-b), it will be necessary to change the direction of the ducting fan unit, proceeding as follows: - Unscrew the screws U (fig. 14); - Turn the ducting fan unit 60° to the right or left; - Replace the screws U. b) The ducting fan unit air outlets must be arranged according to the type of installation to be carried out. · Air outlet directed upwards (fig. 2a-b). - Remove the plastic plug from the upper part of the venting grill and replace it on the rear part (fig. 15). · Air outlet directed towards the wall (fig. 3). - Remove the plastic frame from the air outlet (fig. 16).