HITACHI C2844S
Manual de Usuario

To Store Settings In Feature menu all settings are stored automatically. Sleep Timer As you enter the Feature menu, SLEEP TIMER will be the first selected option. Use � � or � � button to change the Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds.

Install Menu
� To enter the Install menu directly, press the BLUE button, or � Press " " button, now you are in Main menu. In the Main � or � � button. menu, select �INSTALL.� using � � or � � button. Then enter the Install menu pressing �

Selecting Programme If there is left only one minute of the down counting of the timer, it is displayed automatically on the upper right of the screen, and stayed there until finishing. Then TV goes automatically to stand-by. Child Lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote control. The CHILD LOCK feature can be set by � � or � � button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Switch On/Off button) will not work. Selecting Band BAND, can be chosen either, � VHF1, VHF3 or UHF by � � or � Standard � button. To select programme number, you can use � � or � � button, Digit Buttons or The Double Digit button with digit buttons.

The "Standard" setting is fixed to "I". You cannot change this item's setting.
Selecting Search To start the search process, press � � button for forward search or � � button for backward search. SEARCH item blinks during search process, since the process is stopped or signal is found. During search process the semi-transparent menu background becomes "BLUE". To stop the search process � � or � � button must be pressed again. Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen. AV-2 OUTPUT From AV-2 OUTPUT, either TV or AV-1 can be given. TV or AV-1 can be chosen by pressing � OUTPUT". � or � � button on "AV-2 Use � � or � � button on FINE TUNING item, until getting the best image on the screen. To Store Settings Press � � or � � button on STORE option to store Install menu settings.

Selecting Menu Language Menu language can be chosen by pressing � � or � � button on LANGUAGE item.

ENGLISH - 11 -