Automatic Permanent Press/ Regular Cycle
Dry most loads using the Energy Preferred Automatic Setting. Your Automatic cycle shuts off when the selected dryness is reached. The Cycle and Temperature Control knob will not move until the load is almost dry. After the cool-down, the knob automatically turns to an Off area and tumbling stops. � If the load is drier than you like, select a setting closer to LESS the next time you dry a similar load. � If the load is not as dry as you like, complete drying using a Timed cycle. Select a setting closer to MORE the next time you dry a similar load.
Timed Dry cycle
Use a Timed Drying cycle to complete drying if some items are damp after Automatic drying. Timed drying is also useful for: � Delicate items and small loads that need a short drying time. � Bulky items and large loads that require a long drying time. For a damp dry, turn the Cycle and Temperature Control knob to 30 min. or less.
Air cycle
The Air cycle has no heat. Use this unheated cycle to fluff or air dry bedding, plastic tablecloths, foam pillows, sneakers, etc. See page 17 for more information about the Air cycle.
