Appendix A - Technical Speci�cations
Type: LF Driver: HF Driver: Frequency Response: Crossover Frequency: LF Ampli�er Power: HF Ampli�er Power: S/N Ratio: Input Connectors: Polarity: Input Impedance: Input Sensitivity: Protection: Indicator: Power Requirements: Cabinet: Dimension: Weight: 2-way near-�eld studio reference monitors 5-inch Kevlar curved cone with high temperature voice coil and damped rubber surround. 1-inch magnetically shielded natural silk dome 56Hz - 22kHz 3kHz 40W 30W > 100dB typical A-weighted 1 x XLR balanced input connector 1 x TRS balanced/unbalanced input connector positive signal at + input produce outward LF cone displacement 20k ohms balanced,10k ohms unbalanced 85mV pink noise input produces 90dBA output SPL at one meter with volume control at maximum RF interference, output current limiting, over temperature, turn-on/off transient, subsonic �lter, external mains fuse. power on/off indicator on rear panel factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or 100V~50/ 60Hz vinyl-laminated high acoustic ef�ciency MDF 250 mm (H) x 176 mm (W) x 200 mm (D) 5.0 kg/unit (without packing)
* Above speci�cations subject to change without notice
Your BX5a Warranty
Warranty Terms
M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is owned by the original, registered user. Visit www.m-audio.com/warranty for terms and limitations applying to your speci�c product.
Warranty Registration
Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full warranty coverage and helps M-Audio develop and manufacture the �nest quality products available. Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win FREE M-Audio gear.
