SONY BVM-D24E1WE
Manual de Servicio

http://getMANUAL.com

2-2-5. BC and BK Boards Removal and Check
Note : The BC board can be checked in the same way of the BK board.

� To inspect the respective boards, fix the desired board by placing a spacer under the board as shown. Z board (Extension board) BC or BK board

Spacer

Extension board/cable kit (Part No. : A-1394-806-B)

CN5 (Red 4P) Remove the lithium battery in the direction arrow. CN6 (White 4P) CN7 (Black 4P) CN8 (White 3P) Battery holder Removal of Lithium Battery Z board (Extension board) 2 Remove BC board [Loosen two panel stopper screws] � Insert the Z board into the slot and insert the BK board assy into the connect on the Z board. 1 Remove BK board [Loosen two screws (+B 4 � 20)]

Note: When the lithium battery on the BC board is going to be replaced, exchange it within five minutes.

2-6

BVM-D20F1A/D20F1E/D20F1U/D24E1WA/D24E1WE/D24E1WU