|
No hay comentarios de productos.
2-2-4. BUF, E and G Boards Removal and Check
Note : The BUF and G boards can be checked in the same way of the E board.
� To inspect the respective boards, fix the desired board by placing a spacer under the board as shown. Z board (Extension board) BUF, E or G board
Spacer 2 Remove G board [Loosen two screws (+B 4 � 20)]
3 Remove BUF board [Loosen two panel stopper screws] (24inch only)
Remove the lithium battery in the direction arrow.
� Insert the Z board into the slot and insert the E board into the connect on the Z board.
Z board (Extension board)
Battery holder Removal of Lithium Battery
1 Remove E board [Loosen two screws (+B 4 � 20)]
BVM-D20F1A/D20F1E/D20F1U/D24E1WA/D24E1WE/D24E1WU
2-5
|
