To remove only the mechanism assembly from the mechanism unit. (1) Remove the shield case on the DV/CPU board and remove the CN107 FPC wire from the drum assembly.
CN107
To: CN114 MDA/DC board
To: CN117 MDA/DC board To: CN119 MDA/DC board
Fig. 1.6.3 Mechanism assembly
Fig. 1.6.1 (2) Remove the FFC wires that connects the mechanism board, which is mounted on the backs of the mechanism assembly, MDA/DC board, and the DV/CPU board. (3) Remove the four screws 7 on the side. (4) Remove the mechanism assembly as shown in Fig. 1.6.3.
For instructions on disassembling each part of the mechanism assembly, please refer to the Section 2.
