WHIRLPOOL BPAC1230AS2
Manual de Usuario

Cleaning the front panel
1. Unplug power cord.

Screw

2. Remove the front panel from unit when cleaning. Remove two screws from bottom edge of front panel. 3. Lift the front panel up and toward you. 4. Remove slide-out filter and clean separately. (See �Cleaning the filter� below.) NOTE: Front does not have to be removed to clean filter. 5. Clean front panel with warm water and mild soap or detergent. Use a soft cloth. Rinse and dry. Replace front panel. 6. Wipe control panel clean with a soft, dry cloth.

Cleaning the filter
Filter I

The filter is cleanable. A clean filter helps remove dust, lint and other particles from the air. Check every two weeks to see if filter needs cleaning. 1. Remove filter by sliding the filter up and out the top of front panel. 2. Clean filter, using a vacuum cleaner. OR 3. If very dirty, wash filter with warm water and mild detergent. Air dry thoroughly before replacing. 4. Replace filter by sliding it back down into opening at the top of front panel.

Caring YourAir Conditioner For
Annual Maintenance
Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call the service company recommended by your dealer to: l Inspect and clean the coils and condensate water passages. l Check fan and fan motor. The compressor and fan motor are sealed and need no oiling. Expense of annual inspection is customer�s responsibility. OR If you are familiar with electrical appliances, you can do the cleaning and maintenance yourself. If you choose to do so, follow the steps on page 6.

5