DA-116 BOARD (A side) 1 S101: INPUT SELECT switch Selected the input connector for digital audio input signal. XLR ; XLR connector BNC ; BNC connector Factory setting ; BNC 2 D304 and D405: A. SIG (analog output signal) L and R indicators Indicated the existence of the analog output signal and separately indicated the L and R. As the index is -24 dBs (-48 dBFs), lighted when the output the analog signal is bigger than the above index. 3 D112 and D113: DE-EMP (de-emphasis) L and R indicators Indicated the ON/OFF of de-emphasis and separately indicated the L and R. 4 S201-1: DE-EMP (de-emphasis) selection switch Selected the de-emphasis mode to the AUTO/MANUAL. Factory setting; AUTO 5 S201-2 and -3: MANUAL L/R ON/OFF (de-emphasis) switches Selected the de-emphasis to the ON/OFF when selecting the S201-1 to the MANUAL. Factory settings; Both OFFs 6 RV301 and RV401: LEVEL-ADJ (level adjustment) volume Adjusted the audio output level and adjusted to convert the analog audio signal of +4 dBm when receiving -20 dBFs. As necessary, it is possible to voluntarily select the range between -10 dBm and +8 dBm. Factory settings; Both standard levels = +4 dBm 7 S103: DELAY TIME (delay time selection) switch Selected the delay time of the digital delay function. This rotary switch has the 16 points from 0 to F. In combination with S105-2 and -3 (DL TIME �2 and �4) switches, the delay time is selected as the below list. Factory setting; 0
Switch S105-2 S105-3 0 1 2 S103 (Unit: Video frame) E F 15/8 2 15/4 4 15/2 8 3 Standard OFF OFF 1/8 2/8 3/8 4/8 �2 ON OFF 1/4 2/4 3/4 1 �4 � ON 1/2 1 3/2 2
