RADIAL BIG SHOT ABY
Manual de Usuario

FEATURE AND FUNCTIONS
1

www.radialeng.com

True to the Music

INPUT jack connects the cable from your instrument. TUNER jack common output that can be used for an electronic tuner. It is always on. OUTPUT-A jack connects to your main amp. OUTPUT-B jack connects to your second amp. TOGGLE footswitch selects between output A or B.

6

BOTH footswitch turns outputs A and B on at the same time. ISO switch engages the internal isolation transformer on output B to eliminate ground loop hum. 180º switch reverses the phase on output B. This switch only works when the ISO transformer is engaged. LIFT switch disconnects or �lifts� the ground from the cable shield on output B.

IMPORTANT NOTICE!
The Radial BigShot ABY is a passive switcher that is speci�cally designed for use with ampli�ers with proper electrical safety grounds that have been approved by nationally recognized electrical authorities such as UL in the United States, CSA in Canada and other similar bodies in countries around the world. It is further understood that due to the unpredictable nature of connecting any number of different ampli�ers and pedals together, using the ABY can pose a potential for electric shock, and as such, the user is completely responsible for any and all consequences as these are beyond our control. This means that you are completely responsible to ensure the safe and proper use of the BigShot ABY and to clearly understand that using the BigShot ABY con�rms you have taken full responsibility. If you are not 100% sure of your actions, please consult a quali�ed technician for advice before using this device or connecting any of your equipment to it.

2

7

BigShot ABY Owner�s Manual
Part # R800 7200

3

8

4

9

5

4

3

2

1

RADIAL LIMITED THREE YEAR TRANSFERABLE WARRANTY
Radial Engineering - a division of JP Cabletek Electronics Ltd. warrants this product to be free from defects in material and workmanship to the original owner and will remedy any such defects free of charge according to the terms of this warranty. Radial Engineering will repair or replace at its option any defective component(s) of this product, excluding the �nish, the footswitch (footswitch is warranted for 90 days) and wear and tear from normal use, for a period of three (3) years from the original date of purchase. In the event that a particular product is no longer available, Radial Engineering reserves the right to replace the product with a similar product of equal or greater value. To make a request or claim under this limited warranty, the product must be returned prepaid in the original shipping container (or equivalent) to Radial Engineering or to an authorized repair centre and you must assume the risk of loss or damage. A copy of the original invoice showing date of purchase and the dealer name must accompany any request for work to be performed under this limited warranty. This limited warranty shall not apply if the product has been damaged due to abuse, misuse, misapplication, accident or as a result of service or modi�cation by any other than an authorized repair centre. THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE YEARS. RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON WHERE YOU LIVE.

7 8 9

CAUTION: PLEASE READ THE IMPORTANT NOTICE ON THE BACK COVER BEFORE USING THE BIGSHOT ABY

6

5

Radial Engineering 1638 Kebet Way, Port Coquitlam BC V3C 5W9 Tel: 604-942-1001 Fax: 604-942-1010 email: [email protected]
Radial Engineering is a division of C�TEC (JP CableTek Electronics Ltd.) Radial BigShot ABY users guide Sept. 2005, V1.0 - Part #: R870 1120 00 Subject to change without notice

Radial Engineering

BigShot ABY User Guide

Radial Engineering

BigShot ABY User Guide