BANG&OLUFSEN BEOSOUND OUVENTURE
Manual de Usuario

24

> Using the tape recorder

Instant recording on tape
RADIO

Start playing the source you wish to record, for example radio

The buttons you will use for recording are the three buttons with green text: RECORD, PAUSE, and RETURN.

If you press the RETURN button during recording or while the recording is paused, the tape recorder will rewind the tape to the spot where your recording started � that is to the spot where you last pressed RECORD. You can then play back what you have just recorded (press TAPE), or if you regret your recording, just press RECORD again to record something else.

then
RECORD

Press to make the tape recorder ready for recording Press again to start recording

then
RECORD

Whenever the BeoSound Ouverture is playing, you can start recording directly on the tape in the tape recorder � just press the RECORD button twice.

PAUSE

Press to pause your recording A pause of four seconds is inserted on the tape

When you press RECORD the first time, the tape recorder gets ready for recording. The display indicates that the system is ready by, alternately, displaying RECORD and the source you are listening to. Press the RECORD button again, and recording starts immediately. You can pause your recording any time by pressing the green PAUSE button. The tape recorder automatically inserts a pause of 4 seconds on the tape. Then press RECORD again to resume recording; or press another source button, for example RADIO, to stop recording and switch off the tape recorder.

then
RECORD

Press to resume recording Press to stop the tape recorder and return to controlling, for example the radio

or
RADIO

At any time before you stop the tape recorder...
RETURN

Press to return to the spot where your recording started

Nice to know... � Before you start recording, don�t forget to set the Dolby NR function and the automatic tape reverse function as you prefer. See page 26. � The recording level is adjusted automatically, which ensures that your tapes will not be overloaded. � The four-second pauses between your recordings are important for the tape recorder to be able to register the tracks on a tape during playback. � When the source for your recording stops (e.g. the CD player), the tape recorder pauses as well � quite automatically. � If the tape runs out, the tape recorder leaves the recording mode and the source for your recording stops simultaneously. If no further instructions are received, the system automatically switches to stand-by after 30 minutes.

Note: The copyright laws of some countries prohibit the copying of prerecorded material.