|
Usuarios conectados
Actualmente hay 5493 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
24
> Using the tape recorder
Instant recording on tape
RADIO
Start playing the source you wish to record, for example radio
The buttons you will use for recording are the three buttons with green text: RECORD, PAUSE, and RETURN.
If you press the RETURN button during recording or while the recording is paused, the tape recorder will rewind the tape to the spot where your recording started � that is to the spot where you last pressed RECORD. You can then play back what you have just recorded (press TAPE), or if you regret your recording, just press RECORD again to record something else.
then
RECORD
Press to make the tape recorder ready for recording Press again to start recording
then
RECORD
Whenever the BeoSound Ouverture is playing, you can start recording directly on the tape in the tape recorder � just press the RECORD button twice.
PAUSE
Press to pause your recording A pause of four seconds is inserted on the tape
When you press RECORD the first time, the tape recorder gets ready for recording. The display indicates that the system is ready by, alternately, displaying RECORD and the source you are listening to. Press the RECORD button again, and recording starts immediately. You can pause your recording any time by pressing the green PAUSE button. The tape recorder automatically inserts a pause of 4 seconds on the tape. Then press RECORD again to resume recording; or press another source button, for example RADIO, to stop recording and switch off the tape recorder.
then
RECORD
Press to resume recording Press to stop the tape recorder and return to controlling, for example the radio
or
RADIO
At any time before you stop the tape recorder...
RETURN
Press to return to the spot where your recording started
Nice to know... � Before you start recording, don�t forget to set the Dolby NR function and the automatic tape reverse function as you prefer. See page 26. � The recording level is adjusted automatically, which ensures that your tapes will not be overloaded. � The four-second pauses between your recordings are important for the tape recorder to be able to register the tracks on a tape during playback. � When the source for your recording stops (e.g. the CD player), the tape recorder pauses as well � quite automatically. � If the tape runs out, the tape recorder leaves the recording mode and the source for your recording stops simultaneously. If no further instructions are received, the system automatically switches to stand-by after 30 minutes.
Note: The copyright laws of some countries prohibit the copying of prerecorded material.
|
|
|
> |
|