PIONEER BDP-LX70A/WY5
Manual de Servicio

1

2

3

4

1.3 NOTE ON FL LENS SET
The Sub Panel , FL Lens, and FL Filter are attached to the chassis with two-sided (double-back) tape. If one of these parts has to be replaced, replace all three parts at the same time. To replace the FL Lens, follow the procedures described below:

A

Procedures for replacement of the FL Lens
1. Lightly attach the FL Lens so that the two projections on the upper side of the panel touch the Sub Panel and that the clearances between the OPEN/CLOSE key and the cutout for that key on the FL Lens will be the same on the left and right sides. 2. After confirming that the FL Lens is properly aligned, strongly push the black part of the FL Lens to firmly attach it. Be careful not to press the OPEN/CLOSE key while attaching the FL Lens.

B

Sub Panel

C

FL Lens
OUTPUT RESOLUTION Key OPEN/CLOSE Key

D

E

F

6
1 2

BDP-LX70A
3 4