PIONEER BDP-HD50-K/KUC
Manual de Servicio

5

6

7

8

7. DISASSEMBLY
Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury. Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common. Note 3: For the performing the diagnosis shown below, the following jigs for service are required. � GGF1529 : Emerqency tray ejection rod. � GGF1533 : BB Extension board � GGD1437 : BB Extension cable
A

Diagnosis of PCB's
1 Bonnet Case and Tray Panel

1 2 3 4 3 6 7

Remove the Bonnet Case by removing the eight screws. Press the Press the Press the Press the STANDBY/ON button to turn on the power. OPEN/CLOSE button to open the Tray. OPEN/CLOSE button to close the Tray. STANDBY/ON button to turn off the power.
B

Remove the Tray Panel.

Pull out the Power cord.

Tray

4

C

3

5
Tray Panel

26 3

How to open the Tray when the power cannot be on

D

1

Insert GGF1529 into bore as shown in the following figure. If the Tray pops out a little, fully pull it out by hand. Tray Tray open

E

1
F

BDP-94HD
5 6 7 8

31