Using Front Panel or Remote Control 1. Make sure the display is plugged into the wall outlet and the main AC switch located at the rear side of the display is switched to ON position. If the power is plugged in and the AC switch is on, the STATUS LED will illuminate solid yellow. 2. Press the POWER button on the front panel or on the remote control. 3. The display will turn on after a brief pause. The STATUS LED will turn green to indicate the power on status. 4. To turn power off, simply press the POWER button on the front panel or on the remote control once again. Using Discrete Power ON/OFF Buttons 1. The discrete POWER ON/OFF buttons send two discrete signals to the display. 2. To turn power on, simply press the POWER ON button. If the display is already switched on, pressing this button will have no effect. 3. To turn off power, simply press the POWER OFF button. If the display is already switched off, pressing this button will have no effect.
DISCRETE POWER ON/OFF
Status LED � Not Illuminated - No AC Power detected. If the main power switch (rear of panel) is switched off, this LED will not illuminate. � Solid Yellow - Standby (Power OFF) with AC power detected.The LED will illuminate yellow if the display is switched off while the main power cord is plugged in. � Solid Green - Power ON
