|
No hay comentarios de productos.
Operating Instructions
7. Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, SD memory recording, the camera may not record the numbers of images as you set. In this case, set the image buffer frequencies longer. For the SD memory recording, 1 image per second setting is recommended. � Clicking [<Back] takes you back to the previous page. � Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes. Setting Enable Pretrigger Image Buffer � Description Check the box to enable the setting. The camera buffers or transfers the image right before the alarm signal is detected. Set an interval, number of images to buffer and total number. The buffered images may not match the total number due to memory capacity, image resolution, image quality or what object you view. Check the box to enable the setting. The camera buffers or transfers the image right after the alarm signal is detected. Set an interval, number of images to buffer and total number. The buffered images may not match the total number due to memory capacity, image resolution, image quality or what object you view.
�
Enable Posttrigger Image Buffer
� �
[For assistance, please call: 1-800-272-7033]
103
|
