Inserting the Shelf and Sheet
The shelf has two guide rods on the right and left. These must always point down.
Inserting the Shelf Insert the shelf so that the two guide rods face down. Insert the shelf on the oven shelf runner rails so that the two holes engage in the retaining bolts of the oven shelf runner rails. Inserting the baking / universal sheet Insert the sheets so that the anti-tip fixture faces to the rear. Insert the sheets on the oven shelf runner rails so that the two holes engage in the front retaining bolts of the oven shelf runner rails. Inserting the shelf and sheet When using the shelf and universal sheet together, place the shelf exactly in the recesses of the sheet.
3
To simplify placement of the insert part if the rails have been pulled out differently, place the insert part on the rails at the back, push it in as far as it will go and then lower it into the retaining bolts at the front.