PHILIPS AZ2537/55
Manual de Usuario

GAMESOUND
Helpful Hints: � During normal playback, you can press PROG to add a current track to your program list. � � tracks. Reviewing the program � In the stop position, press and hold down PROG for a while until the display shows all your stored track numbers in sequence. Helpful Hints: � Display shows : NO PROG if there is no track programmed. Clearing a program You can erase the contents of the memory by: � Press 9 : � Once, if in the stop position; � Twice, during playback. � Press STANDBY ON y; � Select another sound source; � open the CD door = displayed briefly, and program disappears. appears if you press PROG and there is no track selected. appears if you try to store more than 20

MAINTENANCE & SAFETY
Playing with Gamesound (See 8) 1. Press Source selector once or more on the set to select the GAME AUX function (AUX on the remote control) = Display scrolls : 2. Connect your console to the cinches on the front of the set AUDIO ( IN Left / Right) and VIDEO (IN). 3. Press GAMESOUND once or more to select your game sound option. = Display briefly shows or . , ,

MAINTENANCE & SAFETY
Safety Information (See 9) � Place the set on a hard, flat and stable surface so that the system does not tilt. � Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. � The apparatus shall not be exposed to dripping or splashing. � Adequate ventilation with a minimum gap of 15cm between the ventilation holes and surrounding surfaces is necessary to prevent heat buildup. � The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.. � No objects filled with liquids, such as vases, shall be placed on the apparatus. � No naked flame sources, such as lighted candles, should be placed on the apparatus. � The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. � To clean the set, use a dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. CD player and disc handling (See 9) � If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. � The lens of the CD player should never be touched! � Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. � Always close the CD door to avoid dust on the lens. � To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. � Never write on a CD or attach any stickers to it.

Connecting other equipment to your system Use the supplied video cable to connect the VIDEO OUT terminal on the back of the set to VIDEO IN on a TV or VCR for viewing or recording.

Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials:cardboard, expandable polystyrene, polyethylene.

CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment.