|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
MAINTENANCE
PRECAUTIONS & GENERAL MAINTENANCE
� Place the set on a hard, flat surface so that it does not tilt. � Do not expose the set, CDs, batteries or cassettes to humidity, rain, sand, direct sunlight or other places where high temperatures can occur, such as in the vicinity of heating apparatus or in motor cars parked in the sun. � Do not cover the set. The amplifier produces heat which must dissipate freely, so make sure that there is sufficient ventilation around the set. A minimum gap of 15 cm is necessary. � The mechanical parts of the CD player and the cassette deck contain self-lubricating bearings and must not be oiled or lubricated. � A chamois leather slightly moistened with water is sufficient for cleaning the housing. Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives as these may harm the housing.
POWER �CD �RADIO �TAPE OFF
ON
POWER DYNAMIC BOOST
DBB
OPEN
FM AM -
108
MHz
FM 88 AM 92 530 96 650 100 830 104
KHz
PAUSE
1000 1200 1600
STOP � � OPEN
SEARCH
PLAY
PLAY�PAUSE
RECORD
SHUFFLE
STOP SEARCH
MODE
CD MAINTENANCE
� The lens of the CD player should never be touched. � The lens may cloud over if the set is moved from cold to warm surroundings. The CD player will not start. Give the player some time to acclimatise. � To take a CD out of its box, press the centre spindle while lifting the CD. Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust. � To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. � Never write on a CD or attach stickers to it.
RECORDER MAINTENANCE
To ensure a good recording and playback quality, clean the indicated parts A,B and C after every 50 hours of operation or, on average, once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid. � Press PLAY 1 and clean the rubber pressure roller C. � Then press PAUSE ; and clean the capstan B and the heads A. � After cleaning, press STOP�OPEN 9 /. Cleaning of the heads A can also be done by playing a cleaning cassette through once.
C BA
A
11
English
|
|
|
> |
|
