PHILIPS AZ1038/85
Manual de Usuario

CD/MP3 player
About MP3
The music compression technology MP3 (MPEG1 Audio Layer 3) significantly reduce the digital data of an audio CD while maintaining CD quality sound. � Getting MP3 files: you can either download legal music files from the internet to your computer hard disc, or create such files by converting audio CD files in your computer through appropriate encoder software. (128kbps bit rate or higher is recommended for MP3 files.)
�

CD/MP3 Player
1 Lift the CD door at LIFT TO OPEN. Insert a CD with the printed facing up and press the CD door gently. Push the Source selector slider to CD/MP3. � Display shows --- and later, the total number of tracks. Press 2; to start playback. �Audio CD: current track number appears MP3: MP3 is displayed, and display shows current album and track number in turn. (See 3) To pause playback, press 2; (See 4). Press 2; again to resume play. To stop playback, press 9. 1

Different play modes: REPEAT and SHUFFLE (See 6 - 7)
REPEAT � plays the current track continuously REPEAPT ALL � repeats the entire disc/program SHUFFLE � tracks of the entire disc are played in random order Note: � Shuffle play is not available for program playback. To select play mode, press MODE once or more. �The display shows selected play mode. Press 2; to start playback. if in the stop position. To return to normal playback, press MODE repeatedly until the various modes are no longer displayed. � You can also press 9 to cancel your play modes.

4

Repeat steps 2 to 3 to select and store all desired tracks in this way. � PROG and --- are flashed after 20 tracks are stored. To play your programme, press 2;. For MP3:

2

5

3

1

In the stop position, press PROG to activate programming. � Display: PROG and P01 flash, indicating the start of the program. If necessary, press ALBUM+ to select another album. � Display: ALBUM and selected album number (See 9)

2

Creating a MP3 CD: burn the music files from your computer hard disc on a CDR or CDRW using your CD burner. Helpful hints: � Make sure that the file names of the MP3 files end with .mp3. � Total number of music files and albums: around 500 (with a typical file name length of 20 characters) � The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc.

4 5

2 Helpful hints: CD play will also stop when: � the CD door is opened � the CD has reached the end � you select tuner or tape source. 3

3

Press § or � to select your desired track number. � Display: the selected track number in current album. 4 Press PROG to store the desired track number. � Display: PROG and P02 flash, indicating the next program location available.

Selecting a different track
�

Press §, � once or repeatedly until the desired track number appears in the display. For MP3: first press ALBUM+ once or more to find your album. � ALBUM and current album number are flashed briefly. (See 5)

Programming track numbers
You may store up to 20 tracks (for MP3: 10 tracks) in the desired sequence. If you like, store any track more than once. For Audio CD: 1 In the stop position, press PROG to activate programming. � Display: PROG and P01 flash, indicating the start of the program. (See 8) Press § or � to select your desired track number. � Display: PROG and your desired track number flash. Press PROG to store the desired track number. � Display: PROG and P02 flash, indicating the next program location available.

5

Repeat steps 2 to 4 to select and store all desired tracks in this way. � PROG and --- are flashed after 10 tracks are stored. To play your programme, press 2;.

Playing a disc
This player plays Audio Discs including CD-R/ CD-RW, and MP3 CD. Do not try to play a CD-ROM, CD-I, CDV,VCD, DVD or computer CD. IMPORTANT!
�

6

Helpful hints: � When playback of PROGRAM or SHUFFLE is active, use of the ALBUM+ keys are void. Reviewing the program In the stop position, press and hold PROG to see your store track numbers. � The stored track numbers are displayed in the sequence.

�

In the pause/stop position, press 2; to start playback.

For a disc with CD Audio tracks and MP3 files, only the CD Audio tracks will be played. This player does not support UDF format CD.

Finding a passage within a track
1 During playback, press and hold § or �. �The CD is played at high speed and reduced volume. 2 When you recognize the passage you want, release § or � to resume normal playback.

2

�

3