WHIRLPOOL AWZ 410
Guía de consulta rápida

3GB20100.fm Page 4 Monday, February 23, 2004 6:24 PM

Please read the Instructions Manual carefully before using your new washing machine

Quick Reference Guide

GB

Programme selector
To select a programme, turn the knob. The corresponding symbol will appear on the display. To change the programme once the wash cycle has started, turn the knob to � � and set the new programme. When the knob is on � � three dashes blink on the display.

Options
Selecting any option the indication lights up . When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. Start Delay Delays the start of the wash cycle by 1 to 16 hours. Each time the button is pressed, the start of the wash cycle is delayed by 1 hour. Prewash Only for heavily soiled laundry (e.g. sand, granular dirt). Programmes with Prewash last approx. 15 minutes longer. Intensive rinse button More water and a longer time in rinse cycle is added. The intensive rinse function is especially suitable for areas with particularly soft water, for baby clothes and to help people with allergies. Easy Ironing Can be used together with Cotton and Synthetic programmes to make ironing easier. Spin Every programme has an automatic predefined maximum spin speed. Press the button to select a different spin speed. If the spin speed �0� is selected, the final spin is cancelled. The water is drained out only. Quick wash For quick, economical washes. Especially suitable for small, lightly soiled loads. This option can be used with Cotton and Synthetic programmes. Selecting this function allows you to shorten the wash cycle time depending on the temperature. Note: reduce the detergent quantity.

Start button

When you press this button, it lights up and the wash cycle starts. At the end of the wash cycle the light will turn off and END will appear on the display.

On/Off button
This button switches the washing machine on/off.

Changing or interrupting the programme during the wash cycle Turn the programme selector to the � � position. Select the new programme (with temperature), any options and another spin speed if you want. Press the �Start� button again. If the �On/Off� button is pressed, no detergent has to added. Cancelling a programme before the end Turn the programme selector to the � � position. Set the programme selector to programme setting �Drain/Spin. Press the �Start� button to start the �Drain/Spin� cycle.

Display
Shows the wash cycle sequence.

Power and water consumption data Programme Cotton Cotton Cotton Synthetic Synthetic Synthetics short Delicate Wool Hand wash Temperature selector (°C) 90 60 40 60 40 30 30 40 30 Load (kg) 5,0 5,0 5,0 2,5 2,5 2,0 1,5 1,0 2,0 Water Energy (l) 49** 49 49 42 42 30 47 58 55 (kWh) 1,20 0,95 0,45 0,80 0,43 0,30 0,45 0,45 0,25 Programme Duration approx. (hours : minutes)* 1:56 2:13 2:00 1:44 1:34 0:40 0:53 0:48 0:51
Prewash cycle increases programme duration by approx. 15 minutes. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time display may differ from the values given in the table since it depends on the conditions of use in the home. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Whirlpool is a registered trademark of Whirlpool USA

(We reserve the right to make technical modifications)

5019 301 20100

Black process 45.0° 150.0 LPI