$ Attaching the wire
The wire is not provided. Use one which is strong enough to bear the weight of the whole camera (camera + lens). When mounting the cameras with fan (AW-E655, AW-E750, AW-E800, AW-E800A) 1 Use the wire mounting screw (M4!8 mm with flat washer and spring washer) to attach one end of the wire to the pan/tilt head�s arm. 2 Mount the mounting spacer on the top panel of the camera. 3 Use the wire mounting screw (M4!6 mm with flat washer and spring washer) to attach the other end of the wire to the screw hole of the mounting spacer. When mounting the cameras without fan (AW-E350, AW-E650, AW-E300, AW-E300A, AW-E600) 1 Use the wire mounting screw (M4!8 mm with flat washer and spring washer) to attach one end of the wire to the pan/tilt head�s arm. 2 Use the wire mounting screw (M4!6 mm with flat washer and spring washer) to attach the other end of the wire to the screw hole of the top panel of the camera.
For a stand-alone installation
� Camera: AW-E750
M4!6 mm wire mounting screw with flat washer and spring washer Arm Wire
For installation on the ceiling
� Camera: AW-E750
M4!8 mm wire mounting screw with flat washer and spring washer M4!6 mm wire mounting screw with flat washer and spring washer
Mounting spacer (supplied with AW-E750)
M4!8 mm wire mounting screw with flat washer and spring washer
Mounting spacer (supplied with AW-E750)
� Camera: AW-E650, AW-E350
� Camera: AW-E650, AW-E350
� Be absolutely sure to tighten up the mounting spacer and screws securely using a tool such as a screwdriver.