Limiters
�Releasing the limiters
The set limits can be release by taking the following steps. � Releasing the upper limit of operating range 1. While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 47 . 2. The release is completed when TRACING/PRESET MEMORY button 50 [LIMIT OFF] lights. � Releasing the lower limit of operating range 1. While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 46 . 2. The release is completed when TRACING/PRESET MEMORY button 50 [LIMIT OFF] lights. � Releasing the left-most limit of operating range 1. While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 44 . 2. The release is completed when TRACING/PRESET MEMORY button 50 [LIMIT OFF] lights. � Releasing the right-most limit of operating range 1. While holding down the OK button on the controller, press TRACING/PRESET MEMORY button 45 . 2. The release is completed when TRACING/PRESET MEMORY button 50 [LIMIT OFF] lights.
�Setting the limiter again
The same steps set and release the limiter alternately. To set the limiter again, release the current limit and set it again. A set limit can be set again by taking the following steps. 1. Release the desired limit to be set again, referring to �Releasing the limiters�. 2. Set the limit again, referring to �Setting the limiters�.