WHIRLPOOL AWM 6063/2
Manual de Usuario

3gb05017.fm5 Page 21 Thursday, March 1, 2001 10:54 AM

FIRST WASH CYCLE
We recommend the first wash cycle be made without laundry. This will remove any residual water used in testing your washing machine. 1.Turn on the tap. 2.Close the appliance door. 3.Pour a small amount of detergent (about 30 ml) into the detergent dispenser . 4.Select a short program (see programme chart). 5.Press the �Start/Pause� button.

PRECAUTIONS AND GENERAL RECOMMENDATIONS
1.Packing � The packing box may be fully recycled as confirmed by the recycling symbol. Adhere to local regulations when disposing of packaging material. 2.Energy saving tips � Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. � Do not exceed the detergent dosages indicated in the manufacturer�s instructions. � The Eco Flap - a special system in the outlet will prevent detergent loss from the drum to avoid detergent loss into the environment. � Use �Prewash� for heavily soiled laundry only! Save detergent, time, water and energy consumption by not selecting �Prewash� for slight to normally soiled laundry. � Pretreat stains with stain remover or soak dried in stains in water before washing to reduce the necessity of a hot wash program. � Save energy by using a 60° C instead of a 90° C wash programme or a 40° C instead of a 60° C wash programme. � Save energy and time by selecting a high spin speed to reduce the water content in laundry before using a tumble dryer (for machines with adjustable spin speed). 3.Disposing of packaging and old appliances � The washing machine is built from reusable materials. The washing machine must be disposed of in compliance with local waste disposal regulations. � Before scrapping, cut off the power cable so that the washing machine cannot be connected to the mains. � Remove detergent from compartment if you intend scrapping your appliance. 4.Child safety � Children must not be allowed to play with the washing machine. 5.General recommendations � When the appliance is not in use unplug it and turn off the tap. � Before cleaning or carrying out maintenance, switch off the washing machine and disconnect it from the mains supply. � To clean the outside of the washing machine, use a neutral detergent and a damp cloth. � Do not use abrasive detergents. � Do not attempt to force the door open. � If necessary, the power cable may be replaced with an identical one obtained from our AfterSales Service. The power cable must only be replaced by a qualified technician. 6.EC Declaration of Conformity � This washing machine has been designed, constructed and distributed in compliance with the safety requirements of EC Directives: 93/68/EEC.

21

Black Process Plate