No hay comentarios de productos.
5
6
7
8
(2) Setup calibration
By touching the (+) marks on the screen one by one, their calibration results are memorized in the EEPROM.
A
[Display] 0123456789 012345678901234567890 0 1 2 3 4 5 6 7 8 9 +13 +12 +5 +4 0 1 2 3 4 5 6 7 8 9
+14
+11
+6
+3
+15 +16 +17
+10 +9
+7 +8
+2 +1
B
* Pressing any screen points far from the (+) marks is ignored. 0123456789 012345678901234567890 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
FINISHED
[ENTER] Return to Menu
C
* In the above figure, the numbers after (+) (from 1 to 17) shows the order where the cursor moves. * When the 17th (+) mark is pressed, "FINISHED" will be displayed. [Adjustment steps] 1) Push the 16 (+) marks one by one by following the cursor's movement. (The plus marks appear in turn on the screen. When you push one properly, the next mark will be displayed.) 2) Lastly, push the 17th (+) mark. "FINISHED" will be displayed in the center of the screen. 3) To return to the top menu, press the ENTER key on the main unit or remote control. * If you press the ESC key during adjustment, the screen mode will return to the top menu without any adjustment results stored.
E D
F
AVH-P6600DVD/UC
5 6
7
8
171
|