Inicio >>
PIONEER >>
AVH-P5900DVD/XN/RE Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
Section
03
Operating this unit
3 Touch c or d to adjust the equalizer curve. +6 to �4 (or �6) is displayed as the equalizer curve is increased or decreased.
# The actual range of the adjustments are different depending on which equalizer curve is selected. # The equalizer curve with all frequencies set to 0 cannot be adjusted.
Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 2 Touch LOUDNESS on the audio function Touch d to turn loudness on.
menu.
# To turn loudness off, touch c.
Adjusting 7-band graphic equalizer
For CUSTOM1 and CUSTOM2 equalizer curves, you can adjust the level of each band. ! A separate CUSTOM1 curve can be created for each source. If you make adjustments when a curve other than CUSTOM2 is selected, the equalizer curve settings will be memorized in CUSTOM1. ! A CUSTOM2 curve can be created common to all sources. If you make adjustments when the CUSTOM2 curve is selected, the CUSTOM2 curve will be updated. 1 Touch GRAPHIC EQ on the audio function menu. 2 Touch c or d to select an equalizer curve. POWERFUL�NATURAL�VOCAL� CUSTOM1�CUSTOM2�FLAT� SUPER BASS 3 Touch c or d to select the equalizer band to adjust. 50Hz�125Hz�315Hz�800Hz�2kHz� 5kHz�12.5kHz 4 Touch a or b to adjust the level of the equalizer band. +12dB to -12dB is displayed as the level is increased or decreased.
# You can then select another band and adjust the level.
3 Touch c or d to select a desired level. LOW (low)�MID (mid)�HIGH (high)
Using subwoofer output
This unit is equipped with a subwoofer output which can be turned on or off. ! When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 1 Touch SUB WOOFER on the audio function menu. 2 Touch d next to SUB WOOFER to turn subwoofer output on.
# To turn subwoofer output off, touch c.
3 Touch c or d next to PHASE to select the phase of subwoofer output. Touch d to select normal phase and NORMAL appears in the display. Touch c to select reverse phase and REVERSE appears in the display. 4 Touch c or d next to FREQUENCY to select cut-off frequency. Each time you touch c or d selects cut-off frequencies in the following order: 50Hz�63Hz�80Hz�100Hz�125Hz Only frequencies lower than those in the selected range are outputted from the subwoofer.
