Inicio >>
PIONEER >>
AVD-W6000/UC Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
AVD-W6000
- HIDEAWAY SECTION - Removing the Case (not shown) 1. Remove the five screws and then remove the Case.
- Removing the Sub PCB (Fig.3) Remove the solder and then straight the tabs at fore locations indicated. Disconnect the connector and then remove the Sub PCB.
Sub PCB
Fig.3
Main PCB
- Removing the Main PCB (Fig.4) Remove the solder and then straight the tabs at four locations indicated. Remove the Main PCB.