ID LIST
You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name. 1 Press the 5 or 6 buttons to choose an EXT terminal 2 Press the blue button to display the name list (ID LIST)
EXT SETTING EXT-1 EXT-3 EXT-4 TV
D0021-EN
TV OK
1 Press the 5 buttons to choose the arrow from the menu
EXT SETTING EXT-1 EXT-3 EXT-4 TV
D0022-EN
TV OK
DUBBING EXT-2
ID LIST DUBBING EXT-2 VHS S-VHS DVC SAT STB
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal. EXT-1/EXT-3/EXT-4: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal. TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from TV games cannot be output. Teletext programmes cannot be output.
3 Press the 6 buttons to choose a name. Then press the a button The ID LIST disappears and the name is assigned to the EXT terminal. � You cannot assign an EXT terminal name not found in the name list (ID LIST). To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.
