4.8.5 VSM PRESET SETTING Item VSM PRESET Measuring instrument Remote control unit Test point Adjustment part [5.VSM PRESET] (BRIGHT/STD/SOFT) 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE (COOL/WARM/NORMAL) 1. WDR R 2. WDR G 3. WDR B Description (1) Set the ZOOM mode to FULL. (2) Select 5.VSM PRESET from the SERVICE MENU. (3) Press the [MENU] key, and set the PICTURE MODE to BRIGHT. (4) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.CONT. to 5. HUE to the values shown in the [5. VSM PRESET]. (5) Press the [MENU] key, and set the PICTURE MODE to STD. (6) Make similar adjustment as in 4 above. (7) Press the [MENU] key, and set the PICTURE MODE to SOFT. (8) Make similar adjustment as in 4 above. (9) Press the [MENU] key, and set the COLOUR TEMP to COOL. (10) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.WDR R to 3. WDR B to the values shown in the table. (11) Press the [MENU] key, and set the COLOUR TEMP to WARM. (12) Make similar adjustment as in 10 above. (13) Press the [MENU] key, and set the COLOUR TEMP to NORMAL. (14) Make similar adjustment as in 10 above.