CLOCK/TIMERS
ON/OFF TIMER
YOU tell the TV to turn on and off. Use it as an alarm to wake up, as a program reminder, or to simulate that you�re home when you�re out of the house. To ON/OFF TIMER To operate
ON TIME 10 : 00 AM OFF TIME 7 : 00 AM CHANNEL 02 MODE ONCE EVERYDAY ON/OFF TIMER YES NO FINISH
SET LOCK CODE
The Lock Code locks and unlocks Channel Guard. Write this three digit number down and keep it where would-be viewers will not look for it! To SET LOCK CODE To operate
The padlock icon appears
To set the hour (AM/PM) you want the TV to turn on To move to minutes To set the minutes To accept ON TIME and to move to OFF TIME (set time again) To move to CHANNEL To select channel To move to MODE Choose ONCE or EVERYDAY To YES NO Choose YES for on, NO for off To FINISH To save settings Note: A Timer Preview window will appear in the PIP, lower right corner of your screen, 7 seconds before the Timer changes the current channel to the timed program channel. Note: In order for ON/OFF Timer to work, the clock must be set. After a power interruption the clock will be cancelled. Note: ON/OFF Timer cannot be set to locked or guarded channels.
Zero (the access code is zero)
LOCK CODE FINISH 000
To choose the �rst number To move to the second place To choose the second number To move to the third place To choose the third number To FINISH To save settings and exit
Note: If you forget the Lock Code you can set another one this same way. Note: After a power inter ruption you must reset the lock code.