|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
CONNECTING EXTERNAL EQUIPMENT
The rear Scart EXT-1, Scart EXT-2 sockets, the front EXT -3 socket are three dedicated sockets to connect audio-video equipment.
TV/AV SELECTION
AV
Allows to switch between TV and external modes. By repeatedly pressing the remote control AV (A15) or the TV front panel TV /AV button (B8), the on-screen display is changed as shown : EXT-1 > EXT-2 > EXT-2 S > EXT-3 > EXT-3 S > TV (AV-29FT1 model) EXT-1 > EXT-2 > EXT-2 S > EXT-3 > TV (AV-21FT1 model) Remark: If the signal source from the rear SCART socket (EXT-1) is RGB (e.g.normally from a DVD player)
Rear
VCR / DVD / Video Game / Pay-TV decoder
Important: If your video equipment does not have SCART socket(s), or if you wish to use only the aerial (RF) connection (not recommended), then you should make use of program number 00 on the TV set for best performance. AERIAL socket ANT
EXT-1
EXT- 2
(S
)
REAR SCART SOCKET (EXT-2) REAR SCART SOCKET (EXT-1)
This socket has video / audio inputs and outputs. It is recommended to connect to this socket automatic AV switching equipment such as pay-TV decoders, video games, DVD players and most VCR's. In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the AV buttons (A15 or B8) to select EXT-1. This socket has video / audio inputs and outputs. Automatic AV switching equipment (for example most VCR's) can be connected to this socket. In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the AV buttons (A15 or B8) to select EXT-2. You can also receive an S-VHS signal by selecting EXT-2 S with the AV buttons (A15 or B8).
Front
FRONT AV SOCKET (EXT-3)
The front AV socket has audio and video inputs. Without the video input connection, audio output is not available. To switch from TV to these inputs, use the AV buttons (A15 or B8) and select EXT-3. Note (ONLY FOR AV-29FT1 MODEL): Do not connect the cables to front video input and S-video input at the same time. If do so, picture will not be displayed properly.
ENGLISH
FRONT S-VHS JACK
The front S-VHS jack (B2) has video inputs only. It is necessary to connect the audio inputs to socket (B4) in order to have audio and video. To watch TV from these inputs, use the AV buttons (A15 or B8) and select EXT-3 S. CAMCORDER OR VIDEO GAME
HEADPHONE SOCKET
To hear TV sound with headphones, insert a 3.5mm headphone plug into the headphone socket. The speaker's sound will be automatically cut off.
12
|
|
|
> |
|