|
Usuarios conectados
Actualmente hay 5765 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
In an AV mode, you can change only the �MODE� or �COLOUR SYSTEM� setting. � If you want to modify the current settings of a channel, select the channel of which you want to modify the setting. Then display the main menu on the screen. � Press � � or � � button to select �TUNING� item. � Press � � or � � button to enter �TUNING� menu.
� When you cannot search a channel you want, select the "Standard" item and select other broadcasting system. Then start searching again.
Standard: � If you cannot hear the normal sound even when the picture appears normally, select the correct broadcasting system to hear the sound normally. � Select "Standard" item. Then press � � or � � button to select a broadcasting system.
Colour system: � If the picture is not clear or no colour appears, select the correct colour system to display the picture normally. � Select "Colour system" item. Then press � � or � � button to select a colour system.
UVIDIB������!!���8!
Q��t�h��r Trh�pu T�h�qh�q 8�y��������r� 7h�q
Band, Channel: � If you know a channel number, you can find it directly by entering the channel number. � Select the "Band" item. Then press � � or � � button to select the band (C or S) where the channel you want is located. � Select the �Channel� item. Then press � � or � � button to select the channel number, or enter the channel number with the digit buttons. The available channel numbers differ depending on your �COUNTRY� and �Standard� settings.
1. Press � � or � � to select an item in the �TUNING� menu. Then press � � or � � button to change the setting. 2. After all settings of a channel are completed, press � � or � � button to select �Programme� item. Then press � � or � � button to select a programme number which you want to store the setting. 3. Press � � or � � button to select �Store� item. Then press � � or � � button to store the setting. The "STORED" appears at the bottom of the menu for 3 seconds. Then T-V LINK menu appears.
Fine tuning: If the channel reception is poor, fine-tune the channel. � Select "Fine tuning" item. Then press � � or � � button to fine -tune the channel.
UW�Gv�x 9���y�hq��UW�� ��W8S�Arh���r
Name: You can store the channel name or change it. � Select �Name� item. Then press � � or � � button to display a cursor. � Press � � or � � button to select a character and press � � or � � button to move the cursor. � After the name is completed, press the MENU button.
8���v��r QD8 8h�pry
�
4. If you do not have a T-V LINK compatible VCR, press �PICTURE� button to exit the menu. If you have a T-V LINK compatible VCR connected to the EXT.2 terminal, follow the operating procedure �Downloading the data to VCR� on page 21 to transmit the Programme table data to the VCR. Search: You can search a channel manually. � Select "Search" item. Then press � � or � � button to start searching. "SEARCHING" is displayed while the TV is searching a channel. � Searching stops when the TV finds a channel. Then the channel is displayed. � Press � � or � � button repeatedly until the channel you want appears.
Mode: Set "Mode" item to "TV" for the TV channels. � When you watch a picture from your VCR and the picture is unstable, you may improve it by changing the "Mode" setting from "TV" to "VCR".
Decoder (EXT-2): You can only set �Decoder (EXT-2)� item to �ON� if you have a decoder connected to a T-V LINK compatible VCR, which
ENGLISH - 25 -
|
|
|
> |
|