JVC AV-21RM4SN
Manual de Usuario

Via the Euroconnector
Your TV set has an Euroconnector socket. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the AV-1 (EXT.I) or AV-1 S (EXT.I) terminals.

Tips
Care of the Screen:
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.

AV-1 S Mode
If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better picture quality by selecting AV-1 S mode and connecting your equipment to the AV-1 S (EXT.I) terminal of TV. See your equipment's booklet to check if your equipment has such feature.

Poor Picture:
Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, nonearthed audio equipment or neon lights, etc. ? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

Via the RCA jacks
If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the F-AV (Front AV) terminal with the video and audio cables.

No Picture:
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving any transmission. Have you pressed the correct keys on the remote control? Try once more.

Via the ANT (aerial) socket
If your equipment does not have an Euroconnecter or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment. � To store the test signal that comes from the equipment, see "Install. Menu" on page 7 and store it to the programme number 0. You can watch images from that equipment to select the programme number which you stored the test signal.

Remote Control:
Your TV no longer responds to the remote control. Press the �STANDARD� button on the remote control once more. Perhaps the batteries are exhausted. If so you can still use the local buttons at the front of your TV. Have you selected the wrong menu? Press �STANDARD� button to return to TV mode or press �MENU� button to return to the previous menu.

TV and Video Recoder (VCR)
� Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable. � Connect the Video Recorder to the AV-1 or AV-1 S terminal with the SCART cable, or connect it to the F-AV (Front AV) terminal with the audio and video cables.

NTSC Playback
Connect a NTSC video recorder to a terminal. Then press �AV� button to select the corresponding AV mode. NTSC 3.58/4.43 system is detected automatically in AV mode.

No solution:
Switch your TV set off and on. If this does not work, call the service personnel; never attempt to repair it yourself.

Connecting Headphones
Use the headphone socket of your TV, to connect headphones.

ENGLISH - 11 -