TV channel presetting
To register the TV channels automatically
You can register the TV channels into the TV�s channel list automatically. 1 Display the INSTALL menu. � MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically. 3 �SETUP TOUR RESTART?� appears.
To start the SETUP TOUR Press the MENU/OK button. Then proceed to step 5 of �Setting up your TV� on page 7. Press the Red button.
5 Press the 3 button to choose an appropriate sound system. For details, see �SOUND SYSTEM� on page 10. 6 Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed. 7 Repeat step 5 until your desired TV channel appears.
If the reception is poor If noisy sound is heard Press the blue or yellow button to fine tune the TV channel. Press the 3 button to choose an appropriate sound system.
8 Press the MENU/OK button to exit the menu.
To skip the SETUP TOUR
4 The EDIT menu appears.
To edit the channel list If a channel is not registered Proceed to the Step 3 of �To edit the channel list (PR list)� on this page.
To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like. Note: After this operation, other channel�s PR numbers will be changed. 1 Display the INSTALL menu. MENU INSTALL � 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
EDIT PR 7 8 9 10 11 12 13 CH/CC CH 09 CH 11 CH 13
Proceed to the Step 3 of �To register the channel manually� on this page. To exit the menu Press the MENU/OK button.
For details of �SETUP TOUR�, see page 7.
To register the TV channels manually (MANUAL in the EDIT menu)
You can register the TV channels into the TV�s channel list manually. 1 Display the INSTALL menu. � MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
EDIT PR 7 8 9 10 11 12 13 CH/CC CH 09 CH 11 CH 13
â�
3
3 Choose the channel which you want to change PR number, or delete. 4 Do the following action:
To change the PR number (MOVE) To delete the channel (DELETE) Press the 3 button. Then move it to the PR number you want to use it for the channel. Finally press the 2 button. Press the yellow button.
â�
3
5 Press the MENU/OK button to exit the menu.
3 Choose the channel which you want to register. 4 Press the blue button to activate the MANUAL function. The sound system of the channel appears at the right of the CH/CC number.
� About the basic operations of the menu, please see the �How to operate menus and menus locations� on page 4. 13