AV-16KG21 AV-16KG11 3.5.5 METHOD OF SETTING 1. IF [1. VCO] (1) [1] key (2) [1] key (4) [DISPLAY] key Select 1. IF. Select 1. VCO. As you press this key twice, you will return to the SERVICE MENU.
(3) The VCO (CW) screen will be displayed a allow mark when the AFT voltage is at a certain level.
Select 1. IF. Select 2. DELAY POINT. Set (adjust) the setting values of the setting items. When this is pressed twice, you will return to the SERVICE MENU.
NOTE: When the setting value has been changed, the new value will be stored in memory immediately.
2. V/C, 3. DEF and 4. VSM PRESET (1) [2]~[4] keys (2) [MENU / ] keys (3) [MENU - / +] keys (4) [DISPLAY] key Select one from 2. V/C, 3. DEF and 4. VSM PRESET. Select setting items. Adjust the values of the items. When this is pressed, return to the SERVICE MENU.
NOTE: When the setting value has been changed, the new value will be stored in memory immediately.
6. SETUP TOUR (1) By pressing the [6] key, you can change the ON or OFF (should be OFF). (Should be OFF) If it is ON, then you turn the TV power off, when you are turn the TV power on again. The JVC's logo will be shown about 15 seconds automatically. (2) [MENU - / +] keys (3) [MENU ] key Select Language. Auto Search.
