SHARP AR-PX3
Catálogo de piezas

11) Remove the top cover of the printer controller and attach the printer controller.

13) Attach the top cover of the printer controller.

14) Install all the parts that were removed to their original positions. 15) Attach the caution label to the cabinet. (Only EU version)

3. Setting
1) Turn on the power of the unit. 2) Enter the simulation 26-1 mode. 3) Press "PRN: AR-PE2" button. (Communication between the unit and the printer controller is allowed.) 4) Cancel the simulation mode.

12) Connect controller side I/F cable and DC cable.

�3�