SHARP AR-M350N
Manual de Servicio

2. AR-P14 installing procedure
<Before installation> * * This installation procedure is provided for use with the AR-M350U/ M450U series. To connect this machine to a network, a Print Server Card (NIC) ARNC5J must be installed to the multi-function controller board in advance.

<3>Remove the control PWB unit. Remove the five screws that fix the control PWB unit to the main unit of the printer. Then, hold the two grips and pull out the control PWB unit to remove it from the main unit.

*

To enable the printer expansion function, the product key must be acquired. <4>Mount the printer expansion kit ROMs(2 pcs.)to the control PWB. Remove the ROMs(main and boot ROMs)from the control PWB and replace them with the two ROMs(main and boot ROMs)of the printer expansion kit. The main and boot ROMs are indicated with "MAIN" and "BOOT" on the labels on the ROMs respectively. When mounting the printer expansion kit ROMs, insert them to the same positions in the same direction as those before replacement and ensure that the inserted printer expansion kit ROMs are locked with the fittings of the sockets.

The application number, machine serial number, and product key number are important information. Keep the above information for future reference. 1) Mount the printer expantion kit ROMs to the control PWB. <1>Turn off the main switch of the main unit of the printer Turn the main switch located on the front side of the main unit to the "OFF" position. If the machine is equipped with a facsimile unit, also turn off the FAX power switch. Then remove the power plug from the outlet. .

<2>Remove the cables connected to the control PWB unit. Remove all the cables connected to the control PWB unit of the main unit of the printer.

<5>Re-attach the control PWB. Attach the control PWB to the main unit of the printer and fix it using five screws.

AR-M350U UNPACKING AND INSTALLATION 6-2