SHARP AR-M350
Manual de Servicio

5) Connect the power supply unit harness to the PCU PWB of the main unit of the printer. <1>Remove the screw that fixes the harness cover of the main unit of the printer and slide the harness cover up to remove it. Process the harness cover as shown in the illustration.
Screw

7) Attach the rear cabinet of the stand/paper drawer. <1>Pass the cord of the power supply unit through the hole of the rear cabinet and attach the rear cabinet to the stand/paper drawer.

Cut out.

Rear cabinet

Harness cover

<2>Connect the optional power supply harness connector to CN11 (red connector) of the PCU PWB of the main unit of the printer.

<2>Attach the AC inlet cover to the rear cabinet of the stand/paper drawer and fix it with the removed screw.

Connector
CN11

AC inlet cover

<3>Reattach the harness cover to its original position and fix it with the removed screw. At this time, ensure that the optional power supply unit harness is arranged as shown in the illustration. �Fix the harness securely to the wire saddle.

Screw

8) Connect the AC cord of the power supply unit to the main unit of the printer. Connect the AC cord of the power supply unit to the outlet connector of the main unit of the printer at the location shown in the illustration.

Screw Optional power supply harness

Harness cover Wire saddle Wire saddle

AC cord

6) Connect the relay harness of the stand/paper drawer to the power supply unit. Connect the relay harness of the stand/paper drawer to the connector of the power supply unit.
Connector of the power supply connector

Relay harness of the stand/paper drawer

AR-M350 UNPACKING AND INSTALLATION 6-4