POLLING SECURITY
These settings are used for the public box for regular polling memory. Note that they do not apply to F-code polling memory. (See "USING POLLING MEMORY" page 39.)
6
Enter the passcode number (up to 20 digits) and then press the [OK] key.
If you make a mistake, press the [C] key and then re-enter the correct number.
Note
To clear a passcode number, follow these steps: (1) Select "DELETE" in step 4 and then press the [OK] key. (2) Enter the control number that identifies the number you wish to clear, and then press the [OK] key. (3) Select "DELETE" with the [ ] or [ key and then press the [OK] key. ]
POLLING SECURITY
When performing polling memory (see "Polling security" on page 41), this setting is used to select whether any machine will be allowed to poll your machine, or only machines that have been programmed in your machine. Normally this setting is enabled.
1 2 3
Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 94). Select "POLLING SECURITY" with the [ ] or [ ] key and then press the [OK] key. Select "POLLING SECURITY" with the [ ] or [ ] key and then press the [OK] key.
� The setting is enabled and a checkmark appears in the checkbox. � If this procedure is performed when the setting is enabled, the checkmark will be cleared and the setting disabled.
POLLING PASSCODE # MODE
When "POLLING SECURITY" is enabled, use this setting to program (or delete) the fax numbers of the machines that are allowed to poll your machine. Programmed fax numbers are called passcodes. Up to 10 fax numbers can be programmed. To check the programmed numbers, print the "KEY OPE. LIST" (page 95).
1 2 3 4 5
Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 94). Select "POLLING SECURITY" with the [ ] or [ ] key and then press the [OK] key. Select "POLLING PASSCODE # MODE" with the [ ] or [ ] key and then press the [OK] key. Select "ENTER" with the [ ] or [ and then press the [OK] key. ] key
8
Enter a 2-digit control number from 01 to 10 with the numeric keys to identify the passcode that will be entered in the next step, and then press the [OK] key.
If you make a mistake, move the cursor to the mistake with the [ ] or [ ] keys and enter the correct number.
