SHARP AR-FX11
Manual de Servicio

SW Bit No. No. 11

Item

Switch serection and function Enable only in U.S.A., Canada, Australia, and NZL. For Australia, and NZL, selection is limited to ON or OFF. (Setting other than OFF is regarded as ON.) Bit No. OFF Standard/ON Pattern 1 Pattern 2 Pattern 3 Pattern 4 Pattern 5 5 0 0 1 0 1 0 1 6 0 0 0 1 1 0 0 7 0 0 0 0 0 1 1 8 0 1 0 0 0 0 0

U.S.A. 0 0 0 0

CA 0 0 0 0

U.K 0 0 0 0

GR 0 0 0 0

FR 0 0 0 0

Initial value OFF

Key operator YES

5-8 Distinctive ring

12

1 2

Not used Auto switch of Manual receive Auto receive Effective only for France. 1 Enable 0 Disable

1 0

1 0

0 0

0 0

0 0 Disable

3-6 Auto switch call number of Manual receive Auto receive 7 8 Not used Remote selection type

Effective only for France. When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range : 1 - 9times

1 0 0 1 0 0

1 0 0 1 0 0

1 0 0 1 0 0

1 0 0 1 0 0

1 0 0 1 0 0

9times

YES

Only call in

1

Both of call in and call out

0

Only call in

13

1-4 Number of recalls when busy

When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 0 - 14 times (USA/Canada) 0 - 10 times (United Kingdom/Germany/France) 0 - 9 times (Australia/NZL)

0 0 1 0

0 0 1 0

0 0 1 0

0 0 1 0

0 0 1 0

2times

YES

5-8 Resend interval when busy

When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range 1 - 15min

0 0 1 1 0 0 0 1 0 0 0 1 0 0 0

0 0 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 1 1

0 0 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0

0 0 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0

0 0 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0

3min

YES

14

1-4 Number of resends When this item is set to a value outside the setting range, in a communication it is regarded as the initial value. error Binary input Setting range 0 - 1times (USA/Canada/Australia) 0 - 5times (United Kingdom/Germany/France) 5-8 Resend interval in a communication error When this item is set to a value outside the setting range, it is regarded as the initial value. Binary input Setting range : 0 - 15min 0 : Resend immediately after disconnection of the line

1time

YES

1min

YES

15

1-3 Not used

4-8 Signal send level

Binary input On the line : ( - X + Offset) dBm X (SW) : 0 - 26 Offset (Attenuation) -2dB : North America -1dB : Europe

0 1 0 1 1

Follow the destination.

U.S.A.: U.S.A.

CA: Canada

U.K: U.Kingdom

GR: German

FR: France

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-26